Ercoupe Swap Page

Time to clean out your spare parts box? Looking for a part for your Continental C-75-12F? Time to sell the coupe? Need a plane or parts?

Place an ad on the Ercoupe Swap Page. Send me an email when you would like to have your ad removed. Please give me the date of your post so that I don't have to go through them all to find it. Ads are normally removed after 90 days. Non-commercial ads are free -- commercial establishments, please contact me to discuss rates.

This swap page is provided as a public service to the community of Ercoupe (Sanders, Forney, Alon & M-10) owners. This is not a discussion forum, discussions will be deleted. Ads should be limited to those items which are of interest only to this community. If you are selling items of a more general nature, aircraft radios for example, please use another forum unless your ad contains Ercoupe related parts. The webmaster reserves the right to reject or edit all ads. Please do not list items that are currently on any auction site.

WARNING: Read about counterfeit cashier's check & money transfer scams.

Place Ad. Note new instructions.

Return to ErcoupeOwners.com Home Page

For sale Alon landing gear legs( knee action ) with fairings. No axles/brakes. (I installed spring gear. Blueprints for extended baggage compartment. dave@marketingden.com
Dave Gillespie <dave@marketingden.com>
Saskatoon, SK Canada - Tuesday, May 05, 2009 at 21:28:20 (CDT)

Never used Ercoupe Center Span! Photo's available of mounting points and overall span. Still in original box, however, missing documents. Fair offers will be accepted, mainly want to make sure it goes to a good home.
Bryan Cramer <bcramer@yellowions.com>
Vancouver, BC Canada - Monday, April 27, 2009 at 23:39:29 (CDT)

For Sale, Terra TDF-100 ADF system complete with install manual,head,tray,antenna, new ant. wire. Great little ADF system in good shape. $250.00 Call Mark 262-878-2562
Mark Heusdens <coupemanwi@yahoo.com>
Kansasville, Wi. USA - Sunday, April 26, 2009 at 09:48:22 (CDT)

Wanted, Tail cone light and 1 reflector from the inside of a wing tip light. Thanks, Don.
Don McCarthy <dmccarthy at vip.net>
Penticton, BC Canada - Saturday, April 11, 2009 at 08:27:13 (CDT)

TCM 0200A CASE WITH DATA PLATE - FRESH OVERHAUL WITH YELLOW TAG, BUILD UP A CERTIFIED 0200A WITH THIS CASE, NO SEARCHING FOR A USED ENGINE OR CORE, $1200.00, 952-210-1915
DON MCDONALD <ALPHA-AVIATION@VISI.COM>
MINNEAPOLIS, MN USA - Monday, April 06, 2009 at 08:13:47 (CDT)

Fuselage (minus horizontal & elevator), mail gear, ailerons - can send photos, best offer, jim@jbrennan.com
Jim Brennan <jim@jbrennan.com>
Peace Dale, RI USA - Tuesday, March 31, 2009 at 17:11:10 (CDT)

Hi All... I am looking for parts and pieces for the large, 9ft, baggage compartment to install in our Coupe. The parts/kit need not be STC as the a/c is Owner Maintenance. Any help is greatly appreciated. Regards.
Robert A Pionteck <justfly33@worldpost.ca>
Cold Lake, Alberta CANADA - Tuesday, March 31, 2009 at 12:33:53 (CDT)

for sale c85 flanged crankshaft with rods 20 under excellent condition solid throws 200 hours $900
douglas nemeth <denemeth@jetup.net>
rice, mn USA - Wednesday, March 25, 2009 at 16:05:58 (CDT)

If anyone needs the two piece weather strip used to mount the rear windows in the Coupe, I found it at JC Whitney which sells it in 15 foot rolls at $3.08 per foot, or directly from Fairchild Industries which sells it in 50 foot rolls with a minimum order of $50.00. Fairchild Industries web site is http://www.fairchildind.com/ Their Phone number is (847) 550-9580. The part number for the molding and locking strip is 0477 and 0607 respectfully. Here is the important part, if anyone does not wish to order 50 feet. I would be more than willing to send them some of the 50 foot roll that I bought to try to recoup my expenses at $1.50 per foot plus postage. They can contact me at elroye61102@yahoo.com or by calling 815-963-2642 or cell 815-543-4735. Thanks Elroy Hilbert.
Elroy E Hilbert II <elroye61102@ yahoo.com>
Rockford, IL USA - Wednesday, March 18, 2009 at 09:27:59 (CDT)

Converting to Sport Pilot in fall 2009. Sell or trade '61 Mooney M20B, IFR, digital King, autopilot, speed brakes, 3-blade, leather, history since new. Always hangared. Lives at KHIO. $35K or part trade for LSA. Info on request. See at www.myplaneonline.com
Rick J <rickflys@hotmail.com>
Portland, OR USA - Monday, March 16, 2009 at 14:30:50 (CDT)

WANTED: Marvel-Schebler MA-3SPA #10-4240 or 10-4240-1 for Continental C-85, serviceable unit or core unit. Could be interested in a #10-4252 for a C-90. Email Willie. Thanks.
William Topken <wftopken@cccomm.net>
Fallon, NV USA - Sunday, March 15, 2009 at 21:02:18 (CDT)

1946 ERCOUPE 415-C • $19,995 • AVAILABLE FOR SALE • 1946 Ercoupe 415-c for sale $19,995.00 TT 2295.2 / SMOH 1274.5 and 230.0 since Top done. On a scale of 1-10 on clean it is a 7. Mechanicly it is very sound. Last annual was done Oct. 08. Still good. Wings are fabric, Nose bowl and cowl are new , has oil door, New floor board, Ready to fly!!! 936-433-1401 or email: • Contact Gerald W. Vess, Owner - located Livingston, TX USA • Telephone: 936-433-1401 . • Fax: 832-550-2973 •
Gerald Vess <aarmcotr@eastex.net>
Livingston, Texas USA - Tuesday, March 10, 2009 at 12:07:15 (CDT)

1946 415C, LSA, STC 1320, 1695 TT, 285 SMOH, Metal wings, updated panel. Picture on website.
Kurt Gross <wings@wctc.net>
Wisconsin Rapids, WI USA - Friday, March 06, 2009 at 09:06:33 (CST)

NOW AVAILABLE…fine quality copy of the Model 415-C “ERCOUPE INSTRUCTION MANUAL, June 1946”. Measuring 5 Ľ x 8 ˝, each copy is complete in color with all photographs, text and illustrations as restored and replicated in stapled booklet form like the 36 page original in seller’s possession. The original was printed before the CAA (now FAA) required aircraft manufacturers to provide suitable and approved manuals. This is an important reference and desirable piece of memorabilia for every ERCOUPE 415-C and 415-CD pilot. Price $12.95 each plus S & H at $2.50 sent via 1st Class Mail or $5.85 sent via US Priority Mail. To order send name, address, quantity desired and choice of shipping method to seller L. Videle at lavlavalle@mwt.net. In response you will receive two attachments, 1) a Composite photo of the Manual and 2) an Order Form with payment instructions using a Credit Card thru PayPal (preferred), Money Order or Personal Check
L. Videle <lavlavalle@mwt.net>
La Valle, WI USA - Thursday, March 05, 2009 at 19:29:11 (CST)

Wanted: 4 cylinders and pistons for a C75-12 engine Jon (410) 353-4926
Jon Buck <jonbuck66@msuspartans.com>
Sykesville, MD USA - Sunday, February 22, 2009 at 08:09:21 (CST)

WANTED=GOOD-LEFT-CORROSION FREE-RAG WING FOR 415C SERIAL # 3201 JOHN SACKETT 585-548-2434 20 FEBRUARY 2009
JOHN SACKETT <jsackett@rochester.rr.com>
BYRON, N.Y. USA - Friday, February 20, 2009 at 15:50:43 (CST)

Need some items for 415-C project. 1. Right Main Landing Gear fairing for a Ser.#812 or earlier (old steel type gear)that can be polished, 2. Fuel Shut-off valve (Kohler 742-FG)that will fit panel shaft and handle. Contact: Gary Holcomb at holcombgg55@aol.com Palestine, TX
Gary Holcomb <holcombgg55@aol.com>
Palestine, Tx USA - Thursday, February 19, 2009 at 21:28:12 (CST)

For Sale: Garmin 295 GPS,excellent condition, used as a backup to aircraft GPS, carrying case, owners manual, antenna extension suction cord, RAM yoke mount RAM windshield mount, Garmin panel mount, no scratches, data base recently updated. Jim Truxel,540-339-4669, can be seen in Northern Va.jimtruxel@comcast.net
Jim Truxel <jimtruxel@comcast.net>
Round Hill, Va USA - Wednesday, February 18, 2009 at 16:19:08 (CST)

Directional gyro. DG out of piper cherokee 6 piper part # 99003 manufactured by aeritalia. Working when removed bought for my coupe but going electric. Selling for what I paid $250.00 plus shipping
len <fishmagicdragon@verizon.net>
harrisburg, pa USA - Tuesday, February 17, 2009 at 16:21:26 (CST)

Wanted : Looking for a pair of sparkplug fairings for a 46 415C Ercoupe.If anyone is interested have a fuel pump for core p/n 4036 and also complete origional ignition harness for the short plugs both available for reasonable offer
Richard Pierce <FEBROTORHEAD@HOTMAIL.COM>
Sheffield Lake, OH USA - Tuesday, February 17, 2009 at 11:11:42 (CST)

I have a 415E project that I must sell. Good center section but no right wing. Fabric left wing. If you may be interested contact me and I will get back with more details and talk price. John
John Savot <jsavot@aol.com>
Greenville, SC USA - Tuesday, February 17, 2009 at 05:49:55 (CST)

im looking for photos of origonal interior for 1946-47 ercoupe.
Allison Holmes <crzy4taz@sbcglobal.net>
riverside, calif USA - Monday, February 16, 2009 at 13:09:41 (CST)

I have a 1946 Aeronca Chief project that I would like to trade for an Ercoupe. The Aircraft is mostly complete with the exception of the engine, prop, and lift struts.If interested contact me at 407-493-7310
Phil Tua <gridlock94@hotmail.com>
Longwood, FL USA - Monday, February 16, 2009 at 11:29:36 (CST)

1947 Ercoupe 415C. TT AF&E 1895. SMOH 1195, STOH 643, Engine updated to C-85-12. Partly disassembled, metal wings(Partly uncovered), New Slick Mags, Cleveland Wheels and Brakes, McCauley Prop, unpainted, left wing spar cap needs replacing, all parts for complete airplane. All logs since new. Repair Manuals, receipts, etc. $11,000 firm 509 796-5280. Bobharding2@aol.com
Bob Harding <Bharding2@aol.com>
Nine Mile Falls, Wa. USA - Saturday, February 14, 2009 at 22:34:02 (CST)

I have a nice Mitchell tachometer for Ercoupe. Great shape, showing approximately 900 hours. New from Spruce, these are $175+. It's yours for $100 and I'll ship USPS Priority. Thanks
Al Demarzo <vtail@60fish.com >
Dallas, TX USA - Tuesday, February 10, 2009 at 18:56:50 (CST)

Wanted: Ercoupe Spinner Front bulkhead for wooden prop. Harry Menear 717 652-1405
Harry Menear <Harryandlois@verizon.net>
Harrisburg, Pa USA - Tuesday, February 10, 2009 at 17:13:10 (CST)

WANTED- Instrument panel w/ provision for glove boxes, old style trim, round gauges 401-789-7170
Jim Brennan <jim@jbrennan.com>
Peace Dale, RI USA - Sunday, February 08, 2009 at 19:54:13 (CST)

Wanted- I'm looking for a 415-C LSA. I don't need a show piece just one in good flying condition. I have the cash, so lets make a deal.
Tom Mullally <tomandjodie@frontiernet.net>
Le Mars, Ia USA - Thursday, February 05, 2009 at 20:20:10 (CST)

Hi...I am in need of a 5" long directional gyro in good working order or one that can be rebuilt. Please let me know if you have anything I can use....Thanks Roger
Roger Lundeen <rl1360@yahoo.com>
Galesbutn, IL USA - Wednesday, February 04, 2009 at 15:37:12 (CST)

need 2 main gear wheel pants upper section with landing light attched for my Alon. Going to remove lights assy. from the left wing. cell 786-543-9921.
Lou Roman <jetsrgn@aol.com>
Miami, FL USA - Monday, February 02, 2009 at 15:14:42 (CST)

Need Data Plate for 1946 ercoupe, if you have one to sell would you contact me at 205-915-7490 ask for James.
James K Humphryes <jhump5821@bellsouth.net>
mccalla, AL USA - Monday, February 02, 2009 at 10:19:29 (CST)

Wanted: Skyport STC'd 30 Gallon Fuel Tank Kit for 1966 Alon A-2 Aircoupe. Does anyone have one of these kits that they haven't installed? All leads appreciated.
Wayne DelRossi <wdelrossi@aol.com>
Simpsonville, SC USA - Sunday, February 01, 2009 at 20:16:16 (CST)

Wanted: I need a new or good used 7.00 by 4 tire for my prewar Ercoupe. Thanks!
Grant Ross <gdross@charter.net>
Carson City, Nv USA - Saturday, January 31, 2009 at 09:59:52 (CST)

1946 Model C fuselage (cockpit-back), near perfect tail feathers w/ large trim tab (parts or whole thing); lots of other C parts, such as gear, wheels, brakes, some instruments, tanks - ask if it's available... offer - 401-789-7170
Jim Brennan <jim@jbrennan.com>
Peace Dale, RI USA - Tuesday, January 27, 2009 at 18:43:03 (CST)

Continental C-85-12F, core engine (stopped suddenly by propeller-earth interface) - offer - 401-789-7170
Jim Brennan <jim@jbrennan.com>
Peace Dale, RI 02879 USA - Tuesday, January 27, 2009 at 18:37:58 (CST)

1966 Alon A2 $24,000, TT 2539, 930 SMOH, full panel, 3 axis contols, inertcom, all log books, this plane is near perfect, the real deal. Plane is hangered at dads(retired A&E) hanger, Delphi, In. Time has run out on dad, needs to liquidate to move close to family, Pictures avaiable. contact Jim Barnhart 931-205-6500
Jim Barnhart <jimlynn15@bellsouth.net>
Delphi, in USA - Monday, January 26, 2009 at 15:19:44 (CST)

1948 415-E for sale $23,000 TT 1878, fresh annual Jan. 09 compliant with all ADS. 85hp. This one is the real thing, perfect inside and out. Always hangared. Pictures available. Plane is located in my fathers hanger retired A&E, Delphi, Indiana. Time has run out on dad, needs to liquidate to move close to family. Contact Jim Barnhart, 931-205-6500
jim Barnhart <jimlynn15@bellsouth.net>
Delphi, in USA - Monday, January 26, 2009 at 15:07:31 (CST)

Removed the rudder pedals from my 1947 415CD and have the parts available for sale. 281-492-8556
Rich Green <rgreen4@sbcglobal.net>
Katy, TX USA - Sunday, January 25, 2009 at 20:00:32 (CST)

Looking for good VSI and Airspeed indicator for 415CD Ercoupe. Thanks Rich 281-222-2502 cell or 281-492-8556
Rich Green <rgreen4@sbcglobal.net>
Katy, TX USA - Sunday, January 25, 2009 at 19:58:44 (CST)

NOW AVAILABLE…fine quality copy of the Model 415-C “ERCOUPE INSTRUCTION MANUAL, June 1946”. Measuring 5 Ľ x 8 ˝, each copy is complete in color with all photographs, text and illustrations as restored and replicated in stapled booklet form like the 36 page original in seller’s possession. The original was printed before the CAA (now FAA) required aircraft manufacturers to provide suitable and approved manuals. This is an important reference and desirable piece of memorabilia for every ERCOUPE 415-C and 415-CD pilot. Price $12.95 each plus S & H at $2.50 sent via 1st Class Mail or $5.85 sent via US Priority Mail. To order send name, address, quantity desired and choice of shipping method to seller L. Videle at lavlavalle@mwt.net. In response you will receive two attachments, 1) a Composite photo of the Manual and 2) an Order Form with payment instructions using a Credit Card thru PayPal (preferred), Money Order or Personal Check.
L. Videle <lavlavalle@mwt.net>
La Valle, WI USA - Thursday, January 22, 2009 at 08:56:02 (CST)

Hi, I'm lokg for an older brass venturi, 1" I believe to match the one on my 47D. Any help appreciated. Thanks. Russ Reiter
Russ Reiter <rjreiter@hotmail.com>
wetaskiwin, ab USA - Wednesday, January 21, 2009 at 17:25:01 (CST)

Sport Pilot eligible Ercoupe 415-C for sale in Artesia, New Mexico. Asking $28,000. Has VHF Comm Radio and two headsets. Hand held radio also included.
Percy G. Wood <pwood2128h@yahoo.com>
Roswell, NM USA - Tuesday, January 20, 2009 at 14:23:27 (CST)

RH wing fuel tank for 415C, with 2 fitting connections on fuselage side of tank, and opening for Curtis drain on bottom. top of tank has been patched, but otherwise in good condition. Pictures available. $200.00 plus shipping. Buzz Dolim 530 743 3672
Buzz Dolim <buzz597@comcast.net>
Marysville, CA USA - Saturday, January 17, 2009 at 23:00:54 (CST)

RH wing fuel tank for 415C, with 2 fitting connections on fuselage side of tank, and opening for Curtis drain on bottom. top of tank has been patched, but otherwise in good condition. Pictures available. $200.00 plus shipping. Buzz Dolim 530 743 3672 buzz597@comcast.net
Buzz Dolim <buzz597@comcast.net>
Marysville, CA USA - Saturday, January 17, 2009 at 23:00:17 (CST)

I have some extra coupe parts avail,however does anyone know wherei can find a l/h wingtank for a taylorcraft.Again,will trade parts or purchase outright.
scott coggan <scottcog@telusplanet.net>
millet, ab canada - Friday, January 16, 2009 at 20:19:58 (CST)

Goodyear Brakes (Used)off '46 415C. Includes wheels and brakes as removed from plane. Will include some new pads had on hand. Brakes not cleaned very well, sorry to say. $200.00 (also paypal if you wish) (469)371-6388
Dick Jacobs <richardljacobs@gmail.com>
Garland, TX USA - Thursday, January 15, 2009 at 18:44:49 (CST)

Looking for Wheel pants for 47 model D Ercoupe with dual fork nose gear and cleveland brakes. 580-571-5583, Rory Hicks. Buzzardhills@yahoo.com
Rory Hicks <buzzardhills@yahoo.com>
Arnett, Oklahoma USA - Thursday, January 15, 2009 at 14:17:54 (CST)

For Sale, Ercoupe 415 Flat Windshield (Clear)- New in Box - $75.00 - Credit Cards OK - Other Windshield frame parts available - Questions 952-210-1915
Don McDonald <alpha-aviation@visi.com>
Burnsville, mn USA - Thursday, January 15, 2009 at 11:15:54 (CST)

wanted: control wheel shafts, u-joints and sprockets nos or good used that will accept original small taper pins. also interested in nos control system rod ends. 816-456-7767
robert williams <bobwil48917@sbcglobal.net>
lee's summit, mo USA - Wednesday, January 14, 2009 at 15:10:25 (CST)

Need a C-75-12F engine log book. Contact Gary at holcombgg55@aol.com
Gary Holcomb <holcombgg55@aol.com>
Palestine, Tx USA - Tuesday, January 13, 2009 at 09:17:46 (CST)

1947 Ercoupe, Cloth wings, no motor or prop, needs restored, good condition. 308-390-1778
Richard Kern <andrew_blake_kern@hotmail.com>
Gibbon, ne USA - Saturday, January 03, 2009 at 20:44:50 (CST)

Looking for a left wing or main spar for 415C. Jason 320-843-4461
Jason Doscher <jason@jed-aireaviation.com>
Benson, MN USA - Wednesday, December 31, 2008 at 11:50:18 (CST)

For Sale: Early model Ercoupe fuel gage in good shape. float has been soldered. Appears to be complete, made of copper or brass. Very hard to find item. $400
Dan Taylor <dtaylor9319@charter.net>
Greenville, SC USA - Monday, December 29, 2008 at 15:26:57 (CST)

Need DATA Plate and log books for ercoupe 1946 C.
Danny Nichols <netsrfr48@yahoo.com>
Alamogordo, NM USA - Sunday, December 28, 2008 at 17:36:53 (CST)

Looking for LSA Ercoupe with handbrake and no rudder pedals for disabled pilot to get his sport pilots license.
Jason <Schappster@gmail.com>
Ocala, Fl USA - Sunday, December 21, 2008 at 16:39:18 (CST)

i have several main gas tanks i am willing to sell cheap.
barry wells <barrybwells@aol.com>
vacaville, ca USA - Saturday, December 13, 2008 at 17:56:29 (CST)

i need 7.00-4 main tires for my 415 1940 model.i am willing to pay top dollars for them.any idea how i can get them????
barry wells <barrybwells@aol.com>
vacaville, ca USA - Saturday, December 13, 2008 at 17:51:22 (CST)

I have a Mooney M-10 and am trying to find a right gear spring P/N 520021-006. Any info will help. Thanks, Ross
ross h ernest <rernest%zoomtown.com>
cincinnati, ohio USA - Friday, December 12, 2008 at 10:33:42 (CST)

1946 Ercoupe 415-C. QUALIFIES FOR LIGHT SPORT!!! Only 1870 TTAF and 465 SMOH on C-85. Good paint, nice interior. Icom handheld hardwired, Narco AT-150, two place intercom. Wing fabric in excellent condition (1991). Rudder pedals, complete logs, always hangered, no corrosion. Annual due 7-09. C model Ercoupes are getting very hard to find and the prices are going up every month (over $35K on Tradeaplane right now.) Here's your chance to buy a low time one for a reasonable price. Pics available at http://myplane.com/ad/1867 $28,500 Hangered at KMVC. Ben Rumbley • Telephone: 251-302-0551
Ben Rumbley <rumbley1@yahoo.com>
Monroeville, AL USA - Wednesday, December 10, 2008 at 11:43:08 (CST)

Now Available -- 2008 EOC National Convention items: Hats $11.50 each, Shirts available in M, L, XL & XXL $12.50 each, Patches (they were not available at the convention)$6.50 each. All prices include shipping. Can be seen at http://ph.groups.yahoo.com/group/ercoupe-tech/photos/browse/3bd3. Order from Syd Cohen, 705 Kent Street, Wausau, WI. Checks payable to Syd Cohen accepted.
Syd Cohen <sydlois@charter.net>
Wausau, WI USA - Thursday, December 04, 2008 at 09:15:24 (CST)

Hello, I'm looking for a propeller preferably 74 by 46 or 48 pitch. Thanks!
Mark Davis <mokie@ptsi.net>
Hooker, OK USA - Tuesday, December 02, 2008 at 22:29:13 (CST)

WANTED: Wooden floor of baggage compartment for 1946 415C. Must be in great condition. Jim Truxel - 540-338-4669
Jim Truxel <jimtruxel@comcast.net>
Round Hill, Va USA - Tuesday, December 02, 2008 at 15:51:28 (CST)

Wanted: For Ercoupe project: Nose wheel to steering control pushrod, Sliding aluminum window frames(L&R upper and lower for plexiglass),Trim control covers (L&R walls in cabin). Nosegear lower strut tube (no rust or pitting), Engine cowl mounting channels (L&R upper and lower). Control cables, Control wheel center caps with or without "Ercoupe" Logo, Brake pedal arm.
Ted Zabinski <tdragger@hotmail.com>
Altamont, NY USA - Tuesday, December 02, 2008 at 14:03:27 (CST)

I am still looking for a good Alon or M-10 project. If you have one for sale or know of one give me a call at 501-472-3112 or email.
David Lambert <chuckl@conwaycorp.net>
conway, ar USA - Friday, November 28, 2008 at 12:48:40 (CST)

Restored Alon A-2 1966.New paint, glass, radio's, seats and 90HP overhauled engine. It is gorgeous! 28,900 with fresh annual. Ed Duber 330 936 2654
Ed Duber <eduber@zoominternet.net>
Akron, oh USA - Tuesday, November 25, 2008 at 07:39:13 (CST)

Want to buy "C" ercoupe, LSA, at a reasonable price. I would rather it be in good shape. I will be flying it on a Sport Pilot license. Please write if you have what I am looking for.
Gary Jones <gjones4635@charter.net>
Menomonie, Wi USA - Monday, November 24, 2008 at 22:43:50 (CST)

FOR SALE; ERCOUPE 415-C , COMPLETE WITH HANGER! 85 HP nice interior, good windshield and side windows, metal prop, metal wings, wheel pants, nav-com, transponder. Mid time engine runs strong, aircraft just painted and refurbished after years of sitting, including many incidental parts including hiem joints, cables, master cylinder rebuild, etc. This is not a show airplane, just a good fun LSA aircraft. Hanger built by Star Building meets all codes. Located at Winchester VA Municipal Airport (OKV) 5500 X 100 runway, OUTSIDE Washington/Dulles ADIZ, open 24 hours. Has 84 by 16 1/2 foot electric door, clear span interior, concrete floor w/epoxy paint. Insulated, gas hot air heat, city water, 220 V single phase service. Inside airport security fence, with 12 dedicated parking spaces, adjacent to vehicle and people gates Door faces South, hanger located on paved ramp, next to airport shops. Located on West side of runway 32, 613 Airport Rd, next to Aero Engines shop. (Look it up on Google) This is one of the few buildings on airports that you can actually OWN! Aircraft friendly airport and city, $500 mo land rent, low taxes, long renewable lease. Currently rented to our airplane friends with general aviation aircraft. Pictures on request. Will consider favorable financing to qualified buyers. Reason for selling: My old man (Pat), has two Ercoupes, two children and me, wants to move to grass strip in country and play with me and the kids--he deserves that. Thanks, Elizabeth
Pat & Elizabeth <gmtgoodman@verizon.net>
Winchester , VA USA - Saturday, November 22, 2008 at 12:01:26 (CST)

Need a replacement Data Plate for a 415C
Art Barker <art30@msn.com>
San Antonio, Tx USA - Friday, November 21, 2008 at 16:59:42 (CST)

After experiencing some severe medical problems, Stanley Jennings has 2 buildings packed full of parts that he needs to sell to cover expenses. Contact him at his home phone (575.461.2700) or, after Thanksgiving, at his business phone (575.461.2700). Please clearly state your name, contact information and what you may be looking for. He will return your call as soon as possible.
Stanley E. Jennings <jcjjones@aol.com>
Tucumcari, NM USA - Thursday, November 20, 2008 at 14:44:05 (CST)

FOR SALE 1946 ercoupe on gear, disassembled minus engine and prop,no damage,all logs .Call Randy @734-755-2297 Michigan
Randall Mills <randall.mills@gm.com>
Monroe, Mi. USA - Thursday, November 20, 2008 at 09:40:32 (CST)

Hi.. I'm looking for the ram funnel piece that fastens to air intake ands extends to front cowling. Believe this could give me another 1/2 mph cruise! Thanx Russ Reiter..rjreiter@hotmail.com
Russ Reiter <rjreiter@hotmail.com>
Wetaskiwin, Ab. Canada - Wednesday, November 19, 2008 at 01:03:25 (CST)

1946 415C, TTA&E 840, C-85-12, TSMOH 23, LSA, new paint , Airtex interior, dual fork nosegear, new tires,brakes, battery.KX170B,K1201, TDR-950, w/AK350 Encoder, AK-450 ELT,$29,950 VA 540-586-6715
rick redlund <rickredlund@verizon.net>
Goode, VA USA - Monday, November 10, 2008 at 15:27:19 (CST)

need a carb. for a c-85-12 , for my ercoupe
robert e. murphy <flightplanman@aol.com>
plant city, fl. USA - Sunday, November 09, 2008 at 10:30:24 (CST)

McCauley 1B90 74-49 prop for a C75 that is in great shape, but need something close to a a 71-46 prop for a C85. I really don't want to have this shortened, you can't make em longer again. Would prefer to trade, but would consider a sale.
Neal <couper@cox.net>
San Diego, CA USA - Monday, November 03, 2008 at 23:04:12 (CST)

looking for right and left ailerons for 415 c.
len <fishmagicdragon@comcast.net>
harrisburg , pa USA - Saturday, November 01, 2008 at 07:45:49 (CDT)

Looking for a new/used rudder pedal conversion kit for a 1946 Ercoupe 415C. Thx in advance for any info/leads.
Michael Little <mikelittle123@yahoo.com>
Danbury, CT USA - Tuesday, October 28, 2008 at 14:14:35 (CDT)

For Sale: 1946 415C LSA TT 981. No Engine. Dual nosefork, rag wings, rudder pedals, good glass, interior good 7/8 exterior 7/8. Last time in annual was 2/07. Basic gauges including DG & rate of climb. Engine & prop have been removed, not included in sale. Plane is in nice condition. Good logs and bill of sale. Needs engine, prop & annual. Nice low cost LSA $11,800. Call evenings or leave message (440)577-1198
geri griggs <jggriggs@alltel.net>
kingsville, oh USA - Monday, October 27, 2008 at 20:18:46 (CDT)

I have a 1946 415C and and plan to convert the engines long top plugs back to the old short type plugs. To convert I need an old wiring harness with the attached four nuts and the four aluminum cans with caps. From the old harness I will only use the nuts and the end pieces to convert a new wiring harness to fit the cans. If you have what I need, please E-mail price. Thanks, Dennis
Dennis Hatfield <dennisvh@roadrunner.com>
Hemet, CA USA - Friday, October 24, 2008 at 19:06:21 (CDT)

Wanted: A right wing fuel tank that will fit a 415 E. Must be servicable. 608 356 3104. Leave a message if I don't answer.
Mike Powell <mbpowell@yahoo.com>
Baraboo, WI USA - Thursday, October 23, 2008 at 14:48:30 (CDT)

want to buy wheelpants for 415c,has cleveland brakes
BRUCE KINLAW <RBKINLWA@COX.NET>
DESTIN, FL USA - Wednesday, October 22, 2008 at 12:56:37 (CDT)

Looking for a dual fork nose gear. Want to use it for a rebuild and replacement.
Gene <garrard113@aol.com>
Frederick, MD USA - Tuesday, October 21, 2008 at 18:14:23 (CDT)

WANTED: Bottom cowling panel and 1 or 2 landing light assemblies, for gear fairing or wing implant (preferred). jim@jbrennan.com 401-789-7170
Jim Brennan <jim@jbrennan.com>
Peace Dale, RI USA - Tuesday, October 21, 2008 at 11:10:12 (CDT)

Fly Safely, maintain your airplane well!

ERCOUPE 1946 - 415-D - Excellent Condition, Hangar Kept, Annual just completed... Picture Perfect - must sell due to health reasons.... Annual just completed, must see. Call for Details, 352-303-4634 or 352-637-0520 $25,000
CHERYL CREEL <ccreel@circuit5.org>
Inverness, FL USA - Thursday, October 16, 2008 at 16:15:56 (CDT)

2 ea original Ercoupe control yokes, used but serviceable. No center logo caps. $50.00, plus shipping. 530 743 3672
Buzz Dolim <buzz597@comcast.net>
Marysville, CA USA - Wednesday, October 15, 2008 at 15:45:46 (CDT)

WANTED: I am looking for two original Ercoupe control yokes, preferrably with the center caps, in good condition.
John Pound <jcpound@gmail.com>
San Rafael, CA USA - Saturday, October 11, 2008 at 15:47:10 (CDT)

Wanted: 415C or 415CD in reasonable condition. No projects or junk. Would prefer pedals and metal wings but not required. Long range tanks are a big plus.
Bill Peacock <w5wjp@charter.net>
Crowley, TX USA - Saturday, October 11, 2008 at 10:51:11 (CDT)

Very rare Ercoupe skis Federal 1500 withnose ski and factory rigging blueprints. perfect condition but needs new cables and bunges. 519-849-5506 or email for pictures. Also have many parts left over from 3 coupes. Also have a 46 415c for sale.
Robb Nethercott <knotter@brktel.on.ca>
Warwick, On Canada - Monday, October 06, 2008 at 20:24:36 (CDT)

I have a "D" model Ercoupe for sale, N94682. It is still on the FAA registry as a CD but the log books show it was converted to a "D" so that is how I am selling it, a "D". I have been an Ercoupe owner, pilot and enthusiast for many years and over that time learned a little bit about them. I have learned that there are many modifications made over the years that make the original Ercoupe, a great little plane, even better. These modifications include: Shoulder harness (not just seat belts), Cleveland brakes Circuit breakers to replace fuses Double fork nosewheel Spin-on oil filter Oil quick drain adapter Landing lights (this one has duel lights) An alternator to replace the old generator (this one has a 60 amp alternator) Split elevator..same as "E" model (makes for almost no trim adjustment from idle to full power) Alon style exhaust (gets the muffler away from the firewall) Push button starter (easier and light weight) Digital flip-flop radios This Ercoupe has all these modifications...and they were all done legally! All the proper paperwork was done and is in the logs. Almost all of this work was performed by our resident Ercoupe Guru and frequent contributor to the Ercoupe Users list, Lynn Nelsen. In addition to the above, it has: New Vertical Speed Indicator New Artificial Horizon, All new "U" joint on the ailerons New bushing on the control column All new rod ends New header tank in 1994 New voltage regulator Wings recovered in 1997 GPS antenna mounted on fuselage Specifications: Gross Weight-1400 TT-3057 SMOH-57 (That's right...only 57 hours on a major overhaul) Prop-57 since new Some interesting details: This plane was not flown from 1951-1963 and again from 1970-1991. In 1992 it only had 679 hours total time! I flew it last month from NJ to FL in nine hours without a hiccup. It has a Terra Digital Navcom, a Terra Digital VOR head that shows you the "to" and "from" radial in a digital readout, and a Terra Digital transponder. The transponder has a "VFR" button to quickly switch you to a frequency of 1200. The display on the transponder was dim so I sent the unit for a complete overhaul last month ($550). It now is perfect. This plane was painted with Imron paint in 1994. The paint is in very good conditions and shines beautifully. The paint on the leading edges is the only area that is worn. It is scheduled to go into the paint shop next week to have the leading edges repainted. It's yellow and black with a scallop design on the wings. The interior is in great condition. It has an Airtex interior which is just a few years old..black and red and in great condition. Many Ercoupe cowlings are cracked and patched in multiple places from stress, rocks and 60 years of use. This cowling was recently completely replaced with all new parts from Univair, about $1000 in parts alone. It is flawless. This Ercoupe has had $40,000 invested in it since 2001 (the engine overhaul was a sizable chunk of that). I am selling it for $26,500. You can find Ercoupes for $3000, $4000 even $5000 less, but you will spend tens of thousands to bring them up to the condition of this one. I will have pictures available after the plane gets out of the paint shop and at that time I will list it "to the public". If any of you are interested, let me know. It is located in Florida at the Spruce Creek Fly-in (7FL6) and you are welcome to come see it. Contact me at 917 297-1111 or glen@ishootpictures.com.
Glen Davis <glen@ishootpictures.com>
Port Orange, FL USA - Friday, October 03, 2008 at 14:07:27 (CDT)

I have a few props for sale. Sensenich wood model 74FA57 R9887 Fits Franklin eng. 150 h.p. Hartzel Hydroselective c-112 B109-6 NEEDS BLADES, Aeromatic prop MODEL F-200 AER.# 3064-A TYPE CERT. TC 820 74" LONG 6 hole. Aeromatic prop 76" model 0076B ser.# 18842 fits 65 H.P.Franklin 8 hole Wood pusher prop 74x43 4 3/8 bolt circle 6 hole fits cont. eng. Beachroby model R00323272T ser.# 2302. Mag. swt. Navy type A-10 . MAG. SWT. A.C. TYPE A-9 Miltary Compass mark v111 MADE BY PIONEER WW11 BU AERO. PHONE 205-477-6342 ask for Harvey.
Harvey Leydecker <hcleydecker@bellsouth.net>
McCALLA, AL USA - Thursday, October 02, 2008 at 18:42:10 (CDT)

I'm parting out an Ercoupe 415 C many good parts, good clean center section, aluminum landing gear and no engine.
sam <vitalsam@yahoo.com>
ca USA - Tuesday, September 30, 2008 at 08:13:38 (CDT)

Still cleaning our hanger: Two continental C-85/0-200 cylinders, low time, ,0i5 over, with pistons, rings, pins, valves, springs, retainers, push-rod tubes. $400 the pair, plus actual cost of your choice of shipping--pictures on request. These are not welded or beat up, all studs and threads good, ideal for the engine that has just a single piston/cylinder failure--or for that engine you are going to build, or a Christmas present for your old man. Help us buy the kids school clothes. Thanks, Elizabeth
Elizabeth Peffer <gmtgoodman@verizon.net>
winchester , va USA - Thursday, September 25, 2008 at 06:53:43 (CDT)

Trade 1968 C-150 for the best airworthy Ercoupe. TT:4,610, TSMOH: 1,085. Good running and very sweet. Wings are just in the wrong place! E-mail Debbie at dlowe@carrollcountycomet.com or call (765) 491-8515.
Debbie Lowe <dlowe@carrollcountycomet.com>
Battle Ground, IN USA - Wednesday, September 24, 2008 at 08:03:36 (CDT)

ERCOUPE 415-D - Excellent Condition - Just Inspected - ready for new home - Beautiful little plane - medical reasons... Call for Details.....$25000 352-303-4634 or 352-637-0520 - Inverness, Citrus County, Florida
Cheryl Creel <ccreel@circuit5.org>
Inveress, FL USA - Thursday, September 18, 2008 at 16:06:44 (CDT)

1956 f1 forney for sale 352 742 1787 9-16 0816
Bill plant <billp82437@embarq.com>
leesburg, fl USA - Tuesday, September 16, 2008 at 16:06:00 (CDT)

Wanted: Garmin Pilot III GPS in working condition. 540-338-4669. jimtruxel@comcast.net.
Jim Truxel <jimtruxel@comcast.net>
Round Hill, Va USA - Saturday, September 13, 2008 at 07:31:43 (CDT)

Looking for books on Ercoupes at a reasonable. Any help appreciated. Thanks.
Dr. Anna Womack <silverlady57_us@yahoo.com>
Petaluma, CA USA - Thursday, September 04, 2008 at 18:54:09 (CDT)

1948 Ercoupe 415-E ser.4890 N94779 TT 1675 hrs. 13 hrs. SOH Completly rebuilt in 2005 Polished $26,000 Some parts left over for sale Call eve. 765-564-6917 fdeford@yahoo.com
Francis DeFord <fdeford@yahoo.com>
Delphe, IN USA - Tuesday, September 02, 2008 at 19:32:55 (CDT)

Wanted. Good, corrosion free, Ercoupe left wing. Prefer metal wing. (509) 796-5280
Bob Harding <Bobharding2@aol.com>
Nine Mile Falls, Wa USA - Sunday, August 31, 2008 at 11:10:06 (CDT)

For Sale: Converted to Clevelands. Have goodyear wheels, wheel covers and brake assemblies as removed from my 1946 415C. Excellent clips and discs. Extra new pucks. $200.00. You pay actual shipping.
Michael C. Ritter <mcritter@epix.net>
Mohrsville, PA USA - Saturday, August 23, 2008 at 19:00:43 (CDT)

I need a fuel pump for a C75 cont. new or in good working cond.
jim heiking <jimlora@centurytel.net>
wonewoc, wis. USA - Wednesday, August 20, 2008 at 17:26:36 (CDT)

Wanted 46-C nose wheel rim 5.00X5 duel fork cleveland wheel.
Orville Saling <osaling@comcast.net>
Marana, AZ USA - Monday, August 18, 2008 at 11:08:49 (CDT)

Need 1 (one) screw-in fuse holder, bayonet locking type.
Robert Bartunek <bbartsey@aol.com>
Naples, FL USA - Monday, August 18, 2008 at 10:53:33 (CDT)

Trade- Ercoupe for 1968 Cessna 150-runs great, well-maintained,looks swell.
Lowe <dlowe@carrollcountycomet.com>
Delphi, IN USA - Saturday, August 16, 2008 at 13:09:50 (CDT)

For Sale - 46 415C Ercoupe N93308, Ser#631. TT 1680 hrs, 152SMOH, C85-12. Complete history, logbooks. Project has most parts to complete. Rudder pedals and metal wings. $12,500. Call 989-386-7213.
Ralph Cleveland <rntclev@glccomputers>
Clare, MI USA - Wednesday, August 13, 2008 at 08:22:39 (CDT)

Heim rod end bearing source or parts wanted. The rod end bearing used most frequently on the Ercoupe is the Heim 36-14. Spruce now sells the 36-14M meaning magnafluxed. Here's the problem: the 36-14 or 36-14m only have 3/4" thread length and that is OK except at the base of the control column. Two coups that I'm working on had the two rod ends at the bottom of the control column with 1 1/4" thread length. After careful measurement, it appears that this extra thtead length is needed at this location to get proper thread grip when adjusting the nosewheel and mast centers . Any thoughts appreciated as I don't have a source for or even a part no for what is a 36-14 with longer threads than 3/4".
robert williams <bobwil48917@sbcglobal.net>
lee's summit, mo USA - Sunday, August 10, 2008 at 09:31:15 (CDT)

1946 Ercoupe 415-C. 2015 TTAF. 20 SMOH with new Titan cylinders ($11K overhaul). New Slick mags and harness. Double fork nosegear. Cleveland wheels and brakes. Wing fabric in excellent condition. No rudder pedals. Garmin 90 GPS with panel mount, Icom A-200 com, and Narco AT-50 transponder.No Corrosion. All AD's complied with. Not a show winner but a great flying low-time 'Coupe. Hangered at KMVC. $25,900 Ben (251)302-0551
Ben Rumbley <rumbley1@yahoo.com>
Monroeville, AL USA - Monday, August 04, 2008 at 16:27:38 (CDT)

looking to find who ownes N2200H and where it is i used to fly it. Bill fisher, Bowman used to own it.
JERRY FISHER <joanne_fisher@adelphia.net>
camarillo, ca USA - Friday, August 01, 2008 at 02:09:16 (CDT)

Neew a center tank for a 1966 Alon
Gary Schlabaugh <motorcycles@gci.net>
Anchoraqge, AK USA - Thursday, July 31, 2008 at 02:27:55 (CDT)

looking for a fuel new pump for and my 85 HP 415C that I just purchased...also looking for new floats for the main wing tanks and the float& cap for front tank. Also need pull type brake handle...I have foot petals. Thanks John Noone pennsauken Nj 856-661-1752
John Noone <terriair@comcast.net>
pennsauken, nj USA - Monday, July 28, 2008 at 10:02:00 (CDT)

Air-driven Directional Gyro for sale; Model 4000C-6; Edo Aire P/N 1U262-015-5; Mitchell P/N 52D254M. Can be used as air-driven only, or used with appropriate auto-pilot system. $350.00 includes shipping. Buzz Dolim 530 743-3672
Buzz Dolim <buzz597@comcast.net>
Marysville, CA USA - Thursday, July 24, 2008 at 20:13:09 (CDT)

415C tail cone-$50, 415C rt aileron some damage-$50, wire twister -$25, champio spark plug gap setting tool model CT415-$45, robertson tach chek-$20, champio magnifing flashlite (check spark plugs) $15, 0-140 mph airspeed indicator-$75,Heliccoil thread repair kit-$15, air filter part no 8810-$20fuel restricor for fuel pump-part no 48201-40-$25, all parts are plus freight.
thomas montambo <tmontambo@peoplepc.com>
muskegon, mi 49445 - Sunday, July 20, 2008 at 14:14:40 (CDT)

Want to buy ERCO Ercoupr 415-C or 415-C/D light sport eligible. Student Sport Pilot. Will be financing. Should not have a problem getting bank approval. Just need wife's approval.
Jonathan Kalbfeld <jonathan.kalbfeld@gmail.com>
Los Angeles, CA USA - Friday, July 18, 2008 at 16:20:46 (CDT)

Looking for a C-85 Crank, Flanged, yellow-tagged. Tom Croft 314-777-4056
Tom Croft <thomas.croft@sbcglobal.net>
Manchester, MO USA - Sunday, July 13, 2008 at 21:25:14 (CDT)

Looking for 9" diameter spinner backplate (Spun Aluminum)for Ercoupe
Bob Debs <s.debs@att.net>
Downers Grove, IL USA - Saturday, July 05, 2008 at 21:12:57 (CDT)

I want to purchase a LSA eligible Ercoupe. I might consider a project if the price is right. Please send info by e-mail
Stan Comer <stancomer@tumwater.net>
Wenatchee, WA USA - Friday, July 04, 2008 at 10:35:10 (CDT)

WANTED: 415-C, ragwing, no pedals,prefer original unaltered. Average condition, not show,fun flier... thanks Don fbac@family-net.net or 217 565 1869
Don <fbac@family-net.net>
moweaqua, illinois USA - Sunday, June 29, 2008 at 00:01:43 (CDT)

wanted: FRONT WHEEL PANT for Ercoupe with double fork nose gear. Any condition. 216-798-8363
Fred Wellman <fwellman@adelphia.net>
cleveland, oh USA - Wednesday, June 25, 2008 at 17:23:22 (CDT)

Desire a partner M or F in the purchase and ownership of a 1947 Ercoupe 415CD.2600 TTAF 340 SMOH COM LORAN XPONDER/MODE C WHEEL FAIRINGS AND MORE.100 MPH ON 5 GPH. Fresh annual all AD,S complied with.Call Jim 757 788 9907
Jim Kent <jrkent11@cox.net>
Yorktown, Va USA - Sunday, June 22, 2008 at 15:58:05 (CDT)

ERCOUPE WINGS: left & right, fabric-covered (I am removing old rag for inspection). Formerly a mall static display airplane, previous history lost to obscurity.
STEVE FRIBLEY <SEAPLANECFI@YAHOO.COM>
AUBURN, WA USA - Wednesday, June 18, 2008 at 17:14:41 (CDT)

1946 Ercoupe 415C. N2486H.TT A&E 1745, since mahor OH, 15 Hrs. Chrome Cylinders new valves, springs, guides, pistons & pins. Clevland wheels and brakes Logs since new, Icom radio, strobe, shoulder harness, intercom, ELT, vertical card compass. A&P owned. Claremore, Ok. 918-341-5735. floyd.culp@att.net $30,000.00
Floyd Culp <floyd.culp@att.net>
Claremore, Ok USA - Monday, June 16, 2008 at 16:32:12 (CDT)

Looking for airworthy LH,RH exhaust stacks for 1946 415C need asap, Thank you
Dennis Otto <av8tor@egl.net>
Zeeland, MI USA - Friday, June 13, 2008 at 14:35:02 (CDT)

looking for a full length elevator with movable trim tab and the actuator and cable for a 415C.everything need for the trim to function. I need this to get the gross weight increase. let me know what you got.
jim heiking <jimlora@centurytel.net>
wonewoc, wi. USA - Thursday, June 12, 2008 at 16:52:07 (CDT)

Rebuilding my C-85 and want serviceable baffles or find someone to fabricate a set.
Richard Green <rgreen4@sbcglobal,net>
Katy, TX USA - Friday, June 06, 2008 at 21:13:56 (CDT)

Looking for Spinner and back plate for 1961 Forney F1A C90-12F Engine Flanged crankshaft. Please contact Bob Debs at s.debs@att.net
Bob Debs <s.debs@att.net>
Downers Grove, IL USA - Wednesday, June 04, 2008 at 12:12:48 (CDT)

Am looking for a rebuildable Ercoupe/Forney/Alon would like more or less complete airplane (972)890-7035
Jack Wybenga <Jack.Wybenga@gmail.com>
Plano, TX USA - Tuesday, June 03, 2008 at 17:03:03 (CDT)

415C Project. All log books since new Fabric wings, no rudder pedals. C-85 engine crankshaft, crank case and cylinders have been yellow tagged. Purchased new cam and followers. Airframe need re-assembly. Lots of spare parts. Project comes with spare C-75 engine (with log books) has 750 hrs. Can send JPGs. TEL: 201-546-0411 E-mail: sglase@aol.com $12,000
S. Goldstein <sglase@aol.com>
Port Jervis, NY USA - Monday, June 02, 2008 at 06:24:43 (CDT)

415E Project. (Complete A/C) 0-200 engine (650 hrs) 1948 Sanders aviation. All logs since new on engine and airframe. Fabric wings (need recover) Center spar looks real good. Needs upper and lower skins on wing walk boxes. purchased new skins (Univair) but not installed. Cleveland brakes, split elevator, new bubble windshield, comes with spare fuselage for parts. Must take all. $10,000 call or e-mail. Can send JPGs Steve 201-546-0411 (leave message) sglase@aol.com Located in Port Jervis N.Y.
S. Goldstein <sglase@aol.com>
port jervis, NY USA - Monday, June 02, 2008 at 06:15:47 (CDT)
Thanks for looking at this swap page.
Al DeMarzo <ercoupe@60fish.com>
Dallas, TX USA - Wednesday, November 08, 2006 at 19:06:45 (CST)

Copyright © 2006 by ErcoupeOwners.com. All rights reserved.

Site set up by Hands On Web

Site Hosted by JMG Enterprises